LISTING PHOTOS Click photo to enlarge TachoPro (OBD2 ISO9141 Interface + TachoPro dongle integrated)   Demo version Page Views: 183 Date Added: 29/06/2008 Last Updated: 29/06/2008

Price: US$33/pc Year: Make: Model: Art-Nr.: PLT-tachopro Trim: Mileage: Engine: Colour: Description: Tachopro box Art-Nr.: PLT-tachopro   Free Shipping! Price Break from 5 1 from 10 1 from 20 1 $31.35 $29.70 $26.40 Product Specification Features: Fitting for BMW, Benz & VW TachoPro (OBD2 ISO9141 Interface + TachoPro dongle integrated) Description: TachoPro (OBD2 ISO9141 Interface + TachoPro dongle integrated) This compact interface will allow you to easily read/write/modify the mileage/km on your car without the need to remove the dash. It connects to the on-board diagnostics port located in your car. This kit will also allow you to use it as a diagnostic ISO9141 compatible interface. (See OBD2 diagnostic cable specification for details) This tool is used daily by engineers all over the world and is very effective. The software is DOS based and in german, but very easy to use. A laptop or PC is required, note that on very fast ones over 233 MHZ the software might not work. Specification : - Interface is based on certified ISO9141 Bus Transceivers and RS232 level shifters - K-Line & L-Line (K/L Interface) - Bi-Colour status LED`s for K-Line & L-Line - Power LED - Powered from car battery over service cable - Service cables for BMW, Mercedes Benz and Volkswagen included - Comfortable service cable length of 2,00 metres Other Information : 1. The TachoPro software might not work on PC`s that are faster than 233 MHZ 2.Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside so the tachopro software is possible to run and manipulate the mileage 3. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell 4. Scantool, scanmaster, digimoto are using another interface based on ELM interpreter chips and are not compatible to this interface (Of this ELM interpreter chips exist 3 pieces with different protocols) 5. For further dashboard problem, check pls. from what manufacturer your combi instrument is made, VDO(Siemens), Motometer or Magneti. The Tachopro can only work for Polo on the one made from Motometer 6. Tachopro supports cars up to 1999 sometimes to 2001 (from model to model) 7. It can make the full EEPROM backup of the techopro, only the EEPROM from the IC Process 1.- Main Screen 2.- Car selection 3.- Connect and process 4.- Actual Kilometers 5.- Enter new kilometers 6.- Modified Kilometers Supported cars AUDI A3/A4/A6 new VDO AUDI A4 old VDO without FIS AUDI A4 old VDO with FIS AUDI A6 old VDO AUDI A8 VDO previous to 10/96 AUDI A8 VDO posterior a 11/96 AUDI TT BMW E36 BMW E38/E39 High level until SW15 BMW E38/E39 low level until SW15 BMW E38/E39 High level Model 99 FORD Galaxy MERCEDES W140/W129 until 6/96 by combo connector MERCEDES Clase A by diagnostics connector MERCEDES Clase M by diagnostics connector MERCEDES Sprinter, Clase V by combo connector SEAT Alhambra SEAT Arosa SKODA Oktavia VW Golf, Passat, Bus T4 VDO VW Golf A4 Modelo 2000 VW Passat B5 Magneti Marelli VW Golf 4, Polo, Lupo Motometer VW Sharan Magneti Marelli VW New Beetle Magneti Marelli Package Content Interface Tachopro version V2.00   Reference: 1. The TachoPro software might not work on PC`s that are faster than 233 MHZ 2.Interface electronic of the Tachopro & K/L is the same, only tachoPro have the dongle inside 3. Make sure using the Tachopro Software under PLAIN DOS only not under windows or a windows command shell 4. Scantool, scanmaster, digimoto are using another interface based on ELM interpreter chips and are not compatible to this interface (Of this ELM interpreter chips exist 3 pieces with different protocols) 5. For further dashboard problem, check pls. from what manufacturer your combi instrument is made, VDO(Siemens), Motometer or Magneti. The Tachopro can only work for Polo on the one made from Motometer 6. Tachopro supports cars up to 1999 sometimes to 2001 (from model to model) 7. It can make the full EEPROM backup of the techopro, only the EEPROM from the IC That product is not with the CE certifications, we suggest to check from your country's regulation to determine if no problem in importing of it. we do not provide the software for car diagnostic items, we sell only the hardware interface. The user should source it from the specific original licenced or any optional third party. Part of the shareware can search online. Features: Seller Type: City: HongKong County: HongKong Contact Name: henry Reply to ad:   Click here to reply by email   Web site:   Click here to view Contact Phone: +85269203847 View Map: Click Here to view

Average Visitor Rating:    0.00 (out of 5)
Number of Ratings: 0 Votes